isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Procedures|Page 18880 > < Procedures|Page 18878
Page 4
background image

Important:  Place the sunroof module on a flat protective cover, face down.

12. The sunroof window must be in the full open position to do the following:

1. Unhook the wind deflector slide blocks (1) from each side.
2. Unhook the wind deflector tabs (2) from the center of the upper frame. 
3. Remove the wind deflector.

Important :  Mark the left and right sides of the guides in respect to the frame. This will assist in the alignment of the window to the
module later.

Note the location of the bolts, size and color when removing, for proper installation.

13. Remove the two screws (1) on each side of the guides (2).

Procedures|Page 18880 > < Procedures|Page 18878