i-290 2WD L4-2.9L (2008)
Front Seat Back Frame Replacement
Front Seat Back Frame Replacement
Removal Procedure
1. Remove the seat from the vehicle. Refer to Split Bench Seat Replacement (See: Service and Repair/Split Bench Seat Replacement) or Front Seat
Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket) .
2. Remove the seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (See: Front Seat Back Cushion
Cover and Cushion Pad Replacement) .
3. Remove the lumbar assembly. Refer to Front Seat Lumbar Support Replacement (See: Service and Repair/Front Seat Lumbar Support
Replacement) .
4. Remove the 4 seat recliner mounting bolts (1) securing the seat back frame to the seat back recliner mechanism.
5. Remove the seat back frame.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the seat back frame to the seat back recliner mechanism with 4 bolts (1).
Tighten the front seat recliner bolts to 24 N.m (18 lb ft).
2. Install the lumbar assembly. Refer to Front Seat Lumbar Support Replacement (See: Service and Repair/Front Seat Lumbar Support Replacement)
.
3. Install the seat back pad and cover. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (See: Front Seat Back Cushion Cover