i-290 2WD L4-2.9L (2008)
Front Door Weatherstrip: Service and Repair
Front Side Door Weatherstrip Replacement (Extended)
Front Side Door Weatherstrip Replacement (Extended)
Tools Required
J 38778 Door Trim Pad Clip Remover or Equivalent
Removal Procedure
1. Open the front door.
2. Remove the upper weatherstrip mold from the door by removing the integral weatherstrip pushpin (2) from the door using J 38778, or equivalent.
3. Remove the lower weatherstrip mold from the door removing the integral weatherstrip pushpin (3) from the door using J 38778, or equivalent.
4. Remove the weatherstrip from around the door by inserting J 38778, or equivalent, under the weatherstrip (1), and releasing the integral retainers
from the door frame.
5. Remove the weatherstrip from the door.
Installation Procedure