i-290 2WD L4-2.9L (2008)
1. Open the front and rear door, as necessary.
2. Remove the auxiliary weatherstrip by pulling the weatherstrip (1) from the roof pinchweld flange (2).
Installation Procedure
1. Install the auxiliary weatherstrip to the roof pinchweld flange by pressing the weatherstrip (1) onto the roof flange (2), until it is fully seated.
2. Close the front and rear door, as necessary.
Rear Door Weatherstrip Replacement
Rear Door Weatherstrip Replacement
Tools Required
J 38778 Door Trim Pad Clip Remover or Equivalent