i-290 2WD L4-2.9L (2008)
13. Remove the 4 collars between the EBCM and the BPMV. Discard the collars; use NEW only.
14. Rotate the ABS module so that the BPMV is facing up.
Important: When handling the EBCM or the BPMV, use care so as not to cause any misalignment of either of the 2 electrical connectors
for the EBCM or the solenoids on the BPMV.
Important: When separating the EBCM from the BPMV, DO NOT use a pry bar. If the EBCM and the BPMV cannot be separated,
without the use of force, replace the ABS module as an assembly.
15. Separate the EBCM from the BPMV.