i-290 2WD L4-2.9L (2008)
![background image](/isuzu/i-290_2wd/l4-2.9l/Page-1321001.png)
Brake Hose/Line: Service and Repair
Front Brake Hose Replacement
Front Brake Hose Replacement
Removal Procedure
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Notice) .
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and
Repair) .
3. Clean all dirt and foreign material from the brake hoses and the brake pipes.
4. Using a backup wrench on the brake pipe fitting, disconnect the brake pipe from the brake hose.
Important: Install a plug or cap in the brake pipe fitting in order to prevent fluid loss and contamination.
5. Disconnect the brake pipe fitting from the brake hose at the frame.