i-290 2WD L4-2.9L (2008)
Wheel Cylinder: Service and Repair
Wheel Cylinder Replacement
Removal Procedure
Caution: Refer to Brake Dust Caution (See: Service Precautions/Technician Safety Information/Brake Dust Caution) .
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the rear brake shoe assembly. Refer to Brake Shoe Replacement (See: Drum Brake System/Brake Shoe/Service and Repair) .
3. Remove the brake line from the wheel cylinder.
4. Using a plug, plug the brake line as not to allow dirt or the brake fluid to be contaminated.
5. Remove the mounting bolts for the wheel cylinder.
6. Remove the wheel cylinder from the backing plate.
Installation Procedure