i-290 2WD L4-2.9L (2008)
Vacuum Brake Booster: Service and Repair
Power Vacuum Brake Booster Replacement
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Caution) .
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Notice) .
1. Remove the master cylinder assembly. Refer to Master Cylinder Replacement (See: Hydraulic System/Brake Master Cylinder/Service and
Repair/Removal and Replacement/Master Cylinder Replacement) .
2. Remove the knee bolster trim panel. Refer to Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Knee Bolster Replacement) .
3. Remove the retaining clip for the pushrod for the brake booster.