i-290 2WD L4-2.9L (2008)
4. Install the NEW collars in the BPMV and the EBCM.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
Important: When installing the mounting screws for the EBCM to the BPMV, always finger tighten the screws before torquing to the
proper torque specification.
5. Install the mounting screws for the EBCM.
Tighten the mounting screws to 5 N.m (44 lb in).