i-290 2WD L4-2.9L (2008)
![background image](/isuzu/i-290_2wd/l4-2.9l/Page-476003.png)
Important: The oil pan must be installed within 10 minutes from when the sealer was applied.
1. Apply a 5.5 mm (0.22 in) bead of sealer to the oil pan in the areas marked (1). Refer to Adhesives, Fluids, Lubricants, and Sealers (See:
Specifications/Service Limits & General Specifications/Adhesives, Fluids, Lubricants, and Sealers).
2. Apply a 3 mm (0.12 in) bead of sealer to the oil pan in the area marked (2). Refer to Adhesives, Fluids, Lubricants, and Sealers (See:
Specifications/Service Limits & General Specifications/Adhesives, Fluids, Lubricants, and Sealers).
Important: Use care not to allow the sealer to contact the oil pump pipe and screen assembly.
3. Position the oil pan to the engine block.