i-290 2WD L4-2.9L (2008)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Removal Procedure
1. Remove the throttle body. Refer to Throttle Body Assembly Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair).
2. Remove the battery box. Refer to Battery Box Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery Box
Replacement).
3. Remove the oil level indicator and tube. Refer to Oil Level Indicator and Tube Replacement (See: Engine Lubrication/Engine Oil Dip Stick - Dip
Stick Tube/Service and Repair).
4. Disconnect the brake booster hose (6) from the brake booster.
5. Disconnect the engine wiring harness electrical connector (3) from the manifold absolute pressure (MAP) sensor.
6. Disconnect the engine wiring harness retainer (4) from the intake manifold (5).
7. Disconnect the positive crankcase ventilation (PCV) dirty air tube (2) from the camshaft cover.
8. Remove the generator. Refer to Generator Replacement (See: Starting and Charging/Charging System/Alternator/Service and Repair).
9. Disconnect the engine wiring harness retainer (1) from the intake manifold (2).