i-290 2WD L4-2.9L (2008)
2. Position the water pump to the engine.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the water pump bolts.
Tighten the bolts to 10 N.m (89 lb in).
4. Install the water pump pulley.
5. Install the water pump pulley bolts.
6. Using the J 46406, secure the water pump pulley while tightening the water pump pulley bolts.
Tighten the bolts to 25 N.m (18 lb ft).
7. Remove the J 41240 .
8. Install the drive belt. Refer to Drive Belt Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair) or
Drive Belt Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair).
9. Install the fan. Refer to Fan Replacement (LLV - 2.9L, LLR - 3.7L) (See: Cooling System/Radiator Cooling Fan/Service and Repair).
10. Fill the cooling system with the specified coolant and concentration. Refer to Cooling System Draining and Filling (Static Fill) (See: Cooling
System/Service and Repair/Cooling System Draining and Filling (Static Fill))Cooling System Draining and Filling (Vac N Fill) (See: Cooling
System/Service and Repair/Cooling System Draining and Filling (Vac N Fill)).
11. Inspect for leaks.