i-290 2WD L4-2.9L (2008)
Heater Hose: Service and Repair
Heater Outlet Pipe Replacement
Heater Outlet Pipe Replacement
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the engine cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair/Cooling System Draining and Filling (Static Fill))Cooling System Draining and Filling (Vac N Fill) (See: Engine,
Cooling and Exhaust/Cooling System/Service and Repair/Cooling System Draining and Filling (Vac N Fill)) .
2. Using the J 38185, reposition the heater hose inlet clamp from the heater pipe outlet.
3. Remove the heater hose inlet from the heater pipe outlet.
4. Loosen the heater pipe outlet.
5. Remove the heater pipe outlet.
Installation Procedure