i-290 2WD L4-2.9L (2008)
1. Install the bulbs to the backup lamp sockets.
2. Install the backup lamp rotating clockwise until the locking tab is fully seated.
3. Press the tail lamp to the rear body panel until fully seated.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the tail lamp screws (1) to the tail lamp.
Tighten the tail lamp screws (1) to 3 N.m (26 lb in).
5. Close the tailgate.