i-290 2WD L4-2.9L (2008)
Wheel Fastener: Service and Repair
Rear Suspension
Wheel Stud Replacement
Tools Required
J 43631 Ball Joint Separator
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair) .
2. Remove the rear brake drum. Refer to Brake Drum Replacement (See: Brakes and Traction Control/Drum Brake System/Brake Drum/Service and
Repair/Removal and Replacement) .
3. Using the J 43631, remove the wheel stud.
Installation Procedure