i-290 2WD L4-2.9L (2008)
Air Filter Element: Service and Repair
Air Cleaner Element Replacement
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air
Cleaner Outlet Duct Replacement) .
2. Disconnect the engine wiring harness electrical connector (1) from the mass airflow(MAF)/intake air temperature (IAT) sensor (2).
3. Disconnect the secondary air injection (AIR) pump inlet hose (1) quick connect fitting from the air cleaner assembly. Refer to Plastic Collar Quick
Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service
) .