i-290 2WD L4-2.9L (2008)
4. Lift and partially remove the inflatable restraint steering wheel module from the steering wheel in order to expose the electrical connectors.
5. Disconnect the electrical connectors (1).
6. Disconnect the horn electrical connector (3).
Important: Do not attempt to repair the inflatable restraint steering wheel module. The inflatable restraint steering wheel module is
replaced only as an assembly.
7. Remove the inflatable restraint module from the steering wheel.
8. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required
retention period. Refer to Inflator Module Handling and Scrapping (See: Procedures) .
Installation Procedure