i-290 2WD L4-2.9L (2008)
Rear Seat Belt Replacement
Removal Procedure
1. Open the rear seat belt upper guide shoulder bolt trim cover.
2. Remove the rear seat belt upper guide shoulder bolt.
3. Remove the body rear corner trim panel. Refer to Body Side Rear Lower Trim Panel Replacement (Crew Cab) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair/Body Side Rear Lower Trim Panel Replacement (Crew Cab))Body Side Rear Lower Trim Panel
Replacement (Extended Cab) (See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Body Side Rear Lower Trim Panel
Replacement (Extended Cab))Body Side Rear Lower Trim Panel Replacement (Regular Cab) (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Side Rear Lower Trim Panel Replacement (Regular Cab)) .
4. Remove the rear seat belt anchor bolt.
5. Remove the bolt that retains the seat belt retractor assembly to the body.
6. Remove the rear seat belt assembly from the vehicle.
Installation Procedure
1. Position the rear seat belt retractor assembly to the vehicle.