i-290 2WD L4-2.9L (2008)
5. Install the sensor assembly to the radiator support.
Notice: Refer to Fastener Notice.
6. Install the 2 fasteners (1) retaining the discriminating sensor assembly to the radiator support.
Tighten the bolts to 9 N.m (80 lb in).
7. Install the grille. Refer to Grille Replacement (See: Body and Frame/Grille/Service and Repair) .
8. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair) .