i-290 2WD L4-2.9L (2008)
4. Install the outer tie rod to the steering knuckle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the NEW outer tie rod retaining nut.
*
Tighten the outer tie rod retaining nut to 45 N.m (33 lb ft) plus 95 degrees.
*
Tighten the outer tie rod end jam nut to 70 N.m (52 lb ft).
6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair) .
7. Lower the vehicle.
8. Adjust the front toe. Refer to Front Toe Adjustment (See: Alignment/Service and Repair/Front Toe Adjustment) .