i-290 2WD L4-2.9L (2008)
9. Install the left hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Hinge Pillar Trim Panel Replacement - Left Side) .
10. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
11. Install the range selector cable (3) to the bracket (2).
12. Install the retainer (4) to the range selector cable (3).
13. Remove and discard the primary lock lockout pin if a new cable is being installed.
14. Adjust the automatic transmission range selector cable. Refer to Range Selector Lever Cable Adjustment (See: Adjustments) .
15. Lower the vehicle.