i-290 2WD L4-2.9L (2008)
Pressure Plate: Service and Repair
Clutch Assembly Replacement
Tools Required
J 36660-A Torque Angle Meter
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement (RWD) (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Transmission Replacement (RWD))Transmission Replacement (4WD) () .
2. Remove the clutch pressure plate bolts (1).
Discard the bolts.
3. Remove the clutch pressure plate (2) and driven disc (3) from the dowel pins (4) on the flywheel (5).
Installation Procedure