i-290 2WD L4-2.9L (2008)
8. Install the control lever boot screws.
Tighten the control lever boot screws to 2.5 N.m (22 lb in).
9. Install the console (w/o D06 only). Refer to Console Replacement (Small W/ Manual Transmission) (See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Removal and Replacement/Console Replacement (Small W/ Manual Transmission))Console Replacement
(Large w/Manual or Auto Transmission) (See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Console Replacement (Large w/Manual or Auto Transmission)) .
10. Install the shift lever assembly. Refer to Shift Lever Assembly Replacement (D06) (See: Shifter M/T/Service and Repair/Shift Lever Assembly
Replacement (D06))Shift Lever Assembly Replacement (W/O D06) (See: Shifter M/T/Service and Repair/Shift Lever Assembly Replacement
(W/O D06)) .