i-290 2WD L4-2.9L (2008)
3. Pull the harness connector down through the transmission case.
11. Remove the TCC solenoid with O-ring seal, and wiring harness assembly from the transmission case.
12. Inspect the TCC solenoid and wiring harness assembly for the following defects:
*
Damage
*
Cracked connectors
*
Exposed wires
*
Loose pins
Installation Procedure
1. Install the wiring harness and TCC solenoid assembly with a new O-ring seal to the transmission.
2. Install the pass-through electrical connector to the transmission case.