i-350 L5-3.5L (2006)
8. Remove the bolt (1) retaining the door lock assembly to the inner panel, if equipped with AU3.
9. Remove the screws retaining the door lock assembly to the door.
10. Disconnect the electrical connector from the front door lock assembly, if equipped with AU3.
11. Remove the door lock assembly from the door.
Installation Procedure
1. Install the door lock assembly to the door.
2. Connect the electrical connector to the front door lock assembly, if equipped with AU3.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screws retaining the door lock assembly to the door.
Tighten the door lock screws to 7 N.m (62 lb in).
4. Install the bolt (1) retaining the door lock assembly to the inner panel, if equipped with AU3.
Tighten the door lock bolt (1) to 9 N.m (80 lb in).