i-350 L5-3.5L (2006)
2. Connect the sensor connectors to both (2) front end sensors.
3. Install the CPAs to both sensor connectors.
4. Install the SIR fuse into the fuse block (1) located in the underhood fuse block.
5. Staying well away from all air bags, turn ON the ignition, with the engine OFF.
1. The AIR BAG indicator will flash 7 times.
2. The AIR BAG indicator will then turn OFF.
6. Perform the Diagnostic System Check - Vehicle, if the AIR BAG indicator does not operate as described.