i-350 L5-3.5L (2006)
1. Connect the electrical connector to the bulb.
2. Push in and rotate the park lamp (1), high beam headlamp (2), low beam headlamp (3), or the DRL, Park and turn signal, and front side marker
bulb 1/4 turn clockwise in order to install the bulb.
3. Install the bolts that retain the headlamp.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 10 N.m (89 in lb).
4. Inspect the headlamps for proper operation.
5. Install the front grille.