i-350 L5-3.5L (2006)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Replacement-Exhaust
CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT-EXHAUST
REMOVAL PROCEDURE
1. Disconnect the engine wiring harness electrical connector (4) from the exhaust camshaft position (CMP) sensor (5).
2. Remove the exhaust CMP sensor retaining bolt.
3. Remove the exhaust CMP sensor from the cylinder head.
INSTALLATION PROCEDURE
1. Lightly lubricate the O-ring seal with clean engine oil.