i-370 4WD L5-3.7L (2007)
Timing Chain Tensioner: Service and Repair
Timing Chain Tensioner Replacement
Timing Chain Tensioner Replacement
Tools Required
J 44221 Camshaft Holding Tool
Removal Procedure
1. Remove the camshaft cover.
2. Remove the engine front cover.
3. Rotate the crankshaft in the engine rotational direction clockwise, until the #1 piston is at top dead center (TDC) on the compression stroke.
The word Delphi on the exhaust camshaft position actuator will be parallel with the cylinder head to cam cover mating surface.
Caution: Refer to Camshaft Holding Tool Caution.