I-Mark L4-1.8L 4FBI DSL (1982)
Fig. 34 Rocker arm bracket bolt loosening sequence.
Fig. 35 Rocker arm shaft bolts removal sequence.
11.
Using sequence shown in Fig. 34 and 35, remove rocker arm shaft bracket bolts and nuts, then remove rocker arm shaft and rocker arm assembly.
Fig. 39 Removing front head plate
12.
Remove bolts attaching front head plate and remove, Fig. 39.
13.
Remove the camshaft bearing cap bolts, then remove bearing caps with cap side bearing.
14.
Remove camshaft oil seal followed by the camshaft.
15.
Install camshaft oil seal and camshaft.
16.
Apply a generous amount of engine oil to the rocker arm shaft, rocker arms and valve stem end caps.
Fig. 36 Rocker arm bracket bolt tightening sequence.