I-Mark L4-1.8L 4FBI DSL (1982)
Wiper Arm: Technical Service Bulletins
Windshield Wiper - Replacement Arms
SB85-04-001
March 1, 1985
ELECTRICAL
I-MARK (PF) WINDSHIELD WIPER REPLACEMENT ARMS
VEHICLES AFFECTED
Some Isuzu I-Mark models
SERVICE INFORMATION
Windshield wiper performance can be improved on high mileage cars by installing replacement arms with increased tension. Compression force of the
replacement arms has been increased from 530g to 600g.
The new arms are interchangeable with existing arms and blades on 1982 and newer I-Marks. When installing the replacement arms on 1981 models, the
blades must also be replaced with those specified for 1982 and later vehicles.
PARTS INFORMATION
Part Number
Description
8-94175-999-0
Left Wiper Arm
8-94176-000-0
Right Wiper Arm
NOTE:
Each individual arm comes with two (2) blade attachment screws.
SERVICE PROCEDURE
Follow the removal and installation procedure as outlined in the PF Workshop Manual.
WARRANTY INFORMATION
Installation of this part is not covered under the Isuzu Limited Warranty.
