Impulse L4-1994cc 2.0L (1985)
Torsion Bar: Adjustments
1.
With vehicle on a level surface, rock vehicle up and down to settle suspension.
2.
Loosen nuts at front strut bar.
Fig. 15 Torsion bar adjustment, all models. Pickup
3.
On all models except 4x4, measure clearance between rubber bumper and the lower control arm. The proper clearance Z, should be 6.1 inch. for
base model, 7.5 inch for long wheel base model, Fig. 15.
4.
On 4x4 models measure dimension Z, Fig. 15 which should be 5.0 inches.
5.
To adjust height, turn adjusting bolt inward to raise height or outward to decrease height.
6.
Tighten strut bar nuts.
