Impulse Hatchback L4-1809cc 1.8L DOHC (4XF1-W) (1992)
/Page-932002.png)
Fig. 3 Exploded view of evaporator core.
Fig. 6 Exploded view of evaporator core.
9.
Remove nuts and bolts securing instrument panel, Fig. 3, then remove instrument panel and glove box. Refer to Fig. 4, for evaporator case
removal.
10.
Disconnect electrical connectors from resistor and thermostat, release harness from retainers and secure aside.
11.
Remove evaporator case retaining nuts, then the evaporator case, taking care not to damage inlet and outlet tubes. Refer to Fig. 6, for evaporator
case disassembly.
12.
Remove resistor, insulator and thermostat.
13.
Remove retaining clips, then separate upper and lower case halves.
14.
Remove drain hose and evaporator case grommets.
15.
Remove screw and clip securing expansion valve sensor to evaporator, taking care not to damage sensor tube.
16.
Disconnect expansion valve from evaporator inlet, and remove valve along with inlet tube and O-rings.
17.
Lift evaporator from lower case.
