NPR L4-5.2L DSL Turbo (2005)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor (VSS) Replacement
Vehicle Speed Sensor (VSS) Replacement
Removal Procedure
1. Turn off the ignition.
2. Remove the cover(2) and clip(1).
3. Disconnect the vehicle speed sensor connector.
4. Remove the vehicle speed sensor with key rod.
Installation procedure
1. Tighten the vehicle speed sensor.
Tightening torque: 27 N.m (20 lb ft)
2. Connect the vehicle speed sensor connector.
3. Install the cover (2) and clip (1).