Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
Upper / Lower Column Cover
8. Remove the column covers.
Cable Reel And Connectors / SRS Main Harness
9. Disconnect the 2P connector between the cable reel and the SRS main harness.
Disconnect the cable reel 4P connector from the cable reel.
10. Remove the cable reel from the column.
NOTE:
-
Before installing the steering wheel, the front wheels should be aligned straight ahead.
-
Be sure to install the harness wires so that they are not pinched or interfering with other parts.
-
After reassembly, confirm that the wheels are still turned straight ahead and that the steering wheel spoke angle is correct (road test). If minor
spoke angle adjustment is necessary, do so only by adjusting the tie-rods, not by removing and repositioning the steering wheel.