Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
Backprobing Spring-loaded Lock Connectors
To remove the retainer, insert a flat tip screwdriver between connector body and retainer, and carefully pry out the retainer.
NOTE: Take care not to break the connector.
Spring-Loaded Lock Connector
Some SRS system connectors have a spring-loaded lock.
Disconnecting Spring Loaded Lock Connector
Disconnecting
To release the lock, pull the spring-loaded sleeve toward the stop while holding the opposite half of the connector. Then pull the connector halves apart.
NOTE: Be sure to pull on the sleeve and not on the connector half.
Connecting
Connecting Spring Loaded Lock Connector
1. Hold the pawl-side connector half, and press on the back of the sleeve-side connector half in the direction shown. As the two connector halves are
pressed together, the sleeve is pushed back by the pawl.
NOTE: Do not touch the sleeve.