Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
1. Before installing the gearbox, slide the rack all the way to right.
2. Install the pinion shaft grommet. Align the lug portion on the pinion shaft grommet with the slot in the valve body.
3. Pass the right side of the steering gearbox above and through the right side of the rear beam.
4. Raise the led side of the steering gearbox above and through the led side of the rear beam.
5. Loosely install the mount cushion and right mounting brackets.
6. Tighten the four mounting bolts on the stiffener plate first, then tighten the two mounting bolts on the right mounting brackets.
NOTE: After installing the steering gearbox, make sure that there is no interference between the cylinder pipes and rear beam.