Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
![background image](/isuzu/oasis_ls/l4-2253cc_2.3l_sohc_vtec_mfi/Page-1220006.png)
24. Check for wear, burrs and other damage to the edges of the grooves in the sleeve.
NOTE: The pinion shaft and sleeve are a precision matched set. If either the pinion shaft or sleeve must be replaced, replace both parts as a set.
25. Remove the circlip and pinion shaft sleeve from the pinion shaft.
26. Using a knife or an equivalent tool, cut and remove the four seal rings from the sleeve.
CAUTION: Be careful not to damage the edges of the sleeve grooves and outer surface when removing the seal rings.