Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
7. Remove the nuts securing the cable clamp, and the shift cable holder/grommet.
8. Remove the shift cable by pulling if inside the vehicle.
9. Install the shift cable in the reverse order of removal.
NOTE:
^
Install the cable clamp by putting the cutout of the cable clamp with the guide tab on the shift cable holder/grommet.
^
To prevent damage to the control lever joint, be sure to install the shift cable holder after installing the shift cable cover to the torque converter
housing.
^
Make sure the lock pin is seated securely in the cable adjuster, when installing the lock pin.
^
Replace the lock pin if it does not snap over the cable adjuster securely.
10. Check the cable adjustment after installing the shift cable.