Oasis S L4-2253cc 2.3L SOHC VTEC MFI (1998)
SRS Unit Replacement
6. Install the new SRS unit.
7. Connect the SRS main harness 18P connector to the SRS unit; push it into position until it clicks.
8. Install the heater lower covers on the center console.
9. Reconnect the driver's airbag 2P connector to the cable reel 2P connector, then reinstall the access panel on the steering wheel.
10. Reconnect the front passenger's airbag connector to the SRS main harness.
11. Reconnect the battery positive cable, then the negative cable.
12. After installing the SRS unit, confirm proper system operation: Turn the ignition switch ON; the SRS indicator light should come on for about six
seconds and then go off.