Oasis S L4-2253cc 2.3L SOHC VTEC MFI (1998)
Figure 3: Do not allow the caliper to hang freely.
8.
Remove the brake caliper mounting bolts and hang the caliper to the radius rod, using appropriate method. (Figure 3)
Figure 4: Remove these bolts, while holding the rotor.
Figure 5: Remove the hub unit and brake rotor.
9.
Remove the four flange bolts, and remove the hub unit assembly with brake rotor attached. (Figure 4 and 5)
10.
Remove the boot from the lower ball joint.