Pickup 2WD V6-3137cc 3.1L (CPC) (1991)
Ignition Cable: Testing and Inspection
Wire ................................................................................................................................................................................................................. X 1000 ohms
1 ................................................................................................................................................................................................................................ 2.9 - 7.5
2 ................................................................................................................................................................................................................................ 3.5 - 7.8
3 ................................................................................................................................................................................................................................ 2.2 - 7.2
4 ................................................................................................................................................................................................................................ 2.4 - 7.4
5 ................................................................................................................................................................................................................................ 2.4 - 7.4
6 ................................................................................................................................................................................................................................ 2.1 - 7.1
Coil ........................................................................................................................................................................................................................... 1.5 - 3.9
-
Inspect the wires for contamination or swelling.
-
Inspect the terminal ends for corrosion and looseness.
-
Using an ohmmeter, check the resistance of each wire.
-
Replace wires that fail inspections.