isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Engine - Exhaust Valve Leaking|Page 500 > < Engine - Exhaust Valve Leaking
Page 1
background image

Valve: All Technical Service Bulletins
Engine - Exhaust Valve Leaking

BULLETIN NUMBER:
IBOO-S004

GROUP:
INFORMATION

ISSUE DATE:
FEBRUARY 2000

AFFECTED VEHICLES
Trooper II (KT), Rodeo (UC), Pickup (TF), and Amigo (TC) models equipped with 2.3L (1986-1995) and 2.6L (1988-1995)

4ZDI/4ZEI ENGINE EXHAUST VALVE LEAKING

SERVICE INFORMATION

Isuzu has developed new exhaust valves, guides, and seats to improve the durability of exhaust valves used in 4ZD1 and 4ZE1 engines. When servicing
affected vehicles for a leaking exhaust valve condition, refer to the appropriate workshop manual for servicing procedures. Be sure to replace damaged
parts with the new parts listed in the Parts Information section of this Information Bulletin. These new parts must be replaced as a set (i.e., exhaust valve
guide, exhaust valve seat insert, exhaust valve) to ensure the best durability life. These new parts are currently available from the American Isuzu Parts
Distribution Network (AIPDN).

IMPORTANT: 

Repairs should only be done to individual cylinders diagnosed with an exhaust leak, not all 4 cylinders unless required.

Parts Information:

Engine - Exhaust Valve Leaking|Page 500 > < Engine - Exhaust Valve Leaking