isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Hazard Warning Lamps > < Fog Lamp - Adjustment During PDI
Page 2
background image

Refer to Figures 1 and 2.

Park vehicle to directly face a target wall 25 feet away. Be sure fog lamps are facing straight ahead.

2.

Measure the vertical distance from the ground surface to the center of the fog lamp on the vehicle. Subtract 4 inches from this measurement.

3.

Mark the resulting distance on the target wall, directly in front of the vehicle.

4.

Turn on fog lamps.

5.

Adjust fog lamp aim so that the top edge of the high intensity zone is no higher than the mark on the target wall.

FLAT RATE MANUAL UPDATE INFORMATION

Hazard Warning Lamps > < Fog Lamp - Adjustment During PDI