Pickup 4WD L4-2559cc 2.6L SOHC (4ZE1) (1988)
/Page-81002.png)
2. Loosen bolt "B", and draw the tension pulley fully to the water pump side and temporarily tighten bolt "B".
3. Remove the timing belt.
TIMING BELT INSPECTION
Caution in handling
1. Do not bend in less than 20 mm in radius.
2. Avoid twisting or kinking the belt and keep it free from water, oil, dust and other foreign matter.
Visual check
1. The belt must be replaced if cracks or lacerations are found in the side and rear faces.
