Pickup 4WD L4-2559cc 2.6L SOHC (4ZE1) (1988)
A/C Signal: Testing and Inspection
NOTE: A number of problems, in addition of a defective A/C switch, can cause A/C system malfunctions.
1.
With engine at operating temperature and running at idle, probe ECM terminal 15 (green wire, ECM 18 pin connector) with positive voltmeter lead
and ground negative lead.
2.
Turn A/C switch "ON." Meter should read battery voltage, indicating that switch is functioning properly and A/C request signal is reaching the
ECM.
3.
If problems are indicated, check wiring circuits and connections. For complete diagnosis and repair information on the air conditioning system,
refer to HEATING, VENTILATION AND AIR CONDITIONING.