Pickup 4WD L4-2559cc 2.6L SOHC (4ZE1) (1988)
/Page-652001.png)
Wiper Motor: Testing and Inspection
Low Speed and High Speed Inspection
Fig. 48 Wiper motor connector
Low Speed
1.
Remove wiper motor assembly.
2.
Position in suitable vise.
3.
Connect positive battery voltage to terminal No. 2 and negative to terminal No. 1, Fig. 48.
4.
Ensure proper motor low speed operation.
High Speed
1.
Remove wiper motor assembly.
2.
Position in suitable vise.
3.
Connect positive battery voltage to terminal No. 3 and negative to terminal No. 1.
4.
Ensure proper motor high speed operation.
