Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-1216002.png)
3.
Slip the ends of the new cross bar insert into each of the two stanchions and reinstall the two holding screws (Figure 3). Repeat this step for the
other new cross bar insert.
4.
Adjust the cross bars on the slide rails, as desired.
PARTS INFORMATION
Part No.
Description
Quantity
2-90122-002-0
Cross Bar Insert
2
FLAT RATE MANUAL UPDATE INFORMATION
Use the existing labor operation as shown.
