Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
/v6-3165cc_3.2l_sohc_(6vd1)/Page-961005.png)
a) Apply Loctite 515 (or the equivalent) to the flange surface of the housing assembly.
b) Make sure that the housing assembly turns smoothly. If it turns smoothly, the spacer is correct.
c) Tighten the bolt to the specified torque.
NOTE: Be sure to attach the spring washer.
11. Reinstall brake caliper.
With Manual Locking Hub
FRONT HUB AND DISC (4WD Model with Manual Locking Hub)
Fig. 2 Exploded View Of Manual Locking Hub Assembly
REMOVAL
