Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
Valve Cover: Service and Repair
Left Hand Side
REMOVAL
Preparation: Remove battery ground cable
1. Ignition wire
-
Disconnect from spark plug side.
2. Positive Crankcase Ventilation hose and Vacuum hose
-
Disconnect from common chamber.
-
Disconnect vacuum hose from throttle body.
3. Engine harness bracket
-
Remove fixing bolts on cylinder head cover.
4. Exhaust Gas Recirculation (EGR) pipe
-
Remove fixing bolts on cylinder head cover.
-
Remove two fixing bolts on exhaust manifold.
-
Remove flange nut on EGR valve pipe.
5. Cylinder head cover
-
Remove 11 fixing bolts then the cylinder head cover.
INSTALLATION